|Delivery time:||1-2 weeks|
QUAD LOCK BIKE MOUNT KIT - UNIVERSAL FIT
The Quad Lock® Universal Adaptor is designed using a strong 3M™ VHB adhesive that can be adhered directly to the rear of most smartphones or cases, which then allows your smartphone to be securely attached to the Quad Lock® Bike Mount.
Featuring a patented dual-stage lock, you can ride with confidence over bumps and jumps knowing that your smartphone isn’t going anywhere your bike isn’t.
QUICK TO ATTACH / DETACH
Easily twist and lock to view apps while you ride such as Strava®, MapMyRide or Apple® maps. Detach just as easily so you don’t miss a photo opportunity or important phone call again. Remember, it’s all in the technique, not the force.
The Quad Lock® Bike Mount fits tube diameters ranging from 25-40mm in diameter.
1 x Quad Lock® Universal Adaptor (V2) with 3M™ Adhesive
1 x Quad Lock® Bike Mount PRO
1 x Alcohol Wipe
2 x Small EPDM mounting o-rings
2 x Large EPDM mounting o-rings
2 x Nylon zip ties
3M™ VHB adhesive
Durable and tough composite construction
Slim profile (only 4.5mm thick)
56mm wide and 66mm tall
Adheres to flat and slightly curved surfaces
STEM BIKE MOUNT
Glass filled nylon / polycarbonate construction
Stainless steel fasteners
23mm tall and 35mm wide
INSTALLATION & PRODUCT SUITABILITY
The Quad Lock® Universal Adaptor uses a 3M™ VHB™ (very high bond) adhesive which bonds to smooth, non textured, non-porous surfaces such as plastic and metal. It will NOT adhere to rubber, silicon, TPU, soft touch coatings or hydrophobic (water resistant) glass.
Always ensure the application surface is thoroughly cleaned (with alcohol) and dry before applying the adaptor. The 3M™ VHB adhesive is a single use adhesive, it is NOT re-usable.
Not all phones or cases are compatible with the 3M™ VHB™ tape. Please ensure a sufficient bond has been achieved by the 3M™ tape before use.
OK - As a guide, cases manufactured from a hard plastic such as Polycarbonate or ABS with a smooth, non textured surface work well. If the case is overmolded or manufactured from two materials, make sure the rear of the case where you plan to stick the adaptor is made from a hard material.
NOT OK - Rubber, leather, TPU, silicon or heavily textured cases do NOT bond well to the 3M™ VHB™ tape. Always clean the application surface with alcohol and let dry before adhering the adaptor.